The best way to Reset Cadillac Difficulty Codes 1Locate the diagnostic port beneath the driver's side dash. Plug the OBD scan tool in to the port.2Put the crucial into the ignition and turn it for the "on" position, but do not begin the engine. Wait while the scan tool reads the trouble codes.
3Find a command on the scan tool that says "Delete Codes" or something similar. Select this command and wait for it to finish. It'll say anything like "Command Sent" or return for the primary menu.4Unplug the scan tool from the port and turn on the engine. Check to make certain all warning lights and service lights have shut off.
The way to Reset Error Codes on a 98 Jetta 1Find the diagnostic port near the hood release latch inside your Jetta and plug the VAG service and reset tool into the port. Push "Select" Professional diagnositic tools; on the reset tool.2Put the important in the ignition and turn it to the "On" position, but do not begin the engine.3Press down the VAG service and reset tool's "Enter" button and wait 10 seconds for the lights to turn on the tool.4Turn off the car and unplug the tool. Start the engine and confirm that all service and warning lights have shut off on the instrument panel auto diagnostic software.
Related articles:
没有评论:
发表评论