The way to Display Nissan Patrol Fault Codes 1Park the automobile on a flat surface place the transmission gear shift lever into the "P" position. Turn off the engine and apply the parking brake. Turn the ignition back to the "On" position. Tend not to start out the engine.2Locate the 16-pin diagnostic information port. It really is mounted underneath the dashboard on the driver's side on the vehicle diagnostics car tool, just underneath the steering column.
Connect an automotive scan tool's data cable for the 16-pin diagnostic data port.3Turn on the scan tool and permit it to boot up. Choose "PCM" from the scan tool's principal menu. Choose "Codes" from the PCM sub-menu. Pick "Read All Existing and Stored Codes" from codes sub-menu.4Write down all the codes that the scan tool displays and reference them making use of an automotive repair manual distinct to the Nissan Patrol.
The way to Disable the Airbag Light on a Ford Mondeo 1Locate and open the fuse panel which can be discovered underneath the steering column on the dashboard. Pull down on it from the prime together with your fingers.2Plug the connector end on the diagnostic reset tool into the pinned receiver port on the fuse panel.3Put the crucial in to the ignition and turn it for the "II" position. Wait for the diagnostic reset tool to stop blinking. This means the SRS light has been reset.4Unplug the diagnostic reset tool and turn off the vehicle.5Turn the engine on and verify that the SRS light has shut off with the instrument panel.
Related articles:
没有评论:
发表评论