The best way to Reset a Personal computer on a 2004 Nissan Maxima 1Shut off the engine and apply the parking brake. Turn the ignition to the “On” position, but don’t start the engine.2Connect an automotive scan tool towards the Maxima’s diagnostic data port. This port is located underneath the dashboard, towards the left of the steering column.3Power on the scan tool and navigate towards the “ECM&rdquo auto diagnostic software; menu.
Select “Codes,” then select “Clear All Current and Stored DTCs.” Choose “Yes” when the tool asks if you are sure.4Turn off the scan tool and disconnect it from the vehicle. The ECM now is reset. The best way to Reset a Ford Personal computer 1Locate the OBD port on your Ford car, commonly situated towards the left of the Ford's in-cabin fuse panel.
You might have to have to pull down on the fuse panel cover and get rid of it to view the open access port—the only port large enough to accept the OBD plug.2Plug the electrical connector from the OBD tool into the open access port.3Turn the vehicle's ignition key towards the "II" position on the ignition switch and lock assembly.4Wait for the error codes to clear. When the "Check Engine" light goes out, the codes and the personal computer will both reset Obd2 scanner.
Related articles:
没有评论:
发表评论