How to Reset the Adjust Oil Light on a GMC Truck 1Park your truck within a flat area exactly where the front with the automobile is easily accessible.2Pop the hood and climb out in the truck. Lift the hood and secure it with the latch bar.3Remove the plastic caps from each terminals on the battery.
These caps only snap off.4Remove the mounting bolts on both the good and unfavorable battery terminals, making use of a crescent wrench. Slide the terminals off the battery posts.5Wait for numerous minutes, enabling the vehicle's electrical program to totally reset.6Reconnect the terminals towards the battery posts and replace the mounting bolts.7Replace the plastic covers on the terminals and close the vehicle's hood. The "Change oil" Obd2 scanner; light needs to be reset.
How to Reset the Airbag in a PT Cruiser 1Locate the OBD port that is the exact same shape as the OBD scan tool's connector end. This port is usually identified on the driver's side dash close to the steering column.2Plug the scan tool into this port. Place the important into the ignition and turn it to the "Run" position, but do not begin the engine.3Wait for the scan tool to interface with the pc. Find the "Delete Codes" command and pick it. Wait for the scan tool to erase all codes.4Unplug the scan tool and start out the engine Auto diagnostic tool. Confirm the SRS light has turned off on the instrument panel.
Related articles:
没有评论:
发表评论