The best way to Reset the Honda Code 1Find a port on the underside on the driver's side dash that may be the exact same size and shape as the connective finish from the OBD scan tool.
Plug the scan tool into this port.2Put the key in to the Honda's ignition and turn it towards the "On" position, taking care not to crank the engine diagnostics car tool. This will power on the scan tool.3Wait even though the scan tool reads the codes.
Obtain a command on the scan tool that says "Clear Codes" or something related Auto diagnostic tool. When the principle menu reappears, the codes have already been cleared.4Unplug the scan tool and start off the engine. Confirm that all warning and service lights have shut off.
没有评论:
发表评论