Obd2 scanner Tips on how to Adjust the Timing within a Chevy Cobalt

Tips on how to Adjust the Timing within a Chevy Cobalt Auto diagnostics

1Ensure the battery is totally charged or connected to a battery charger. Turn off any accessories like lights Car Diagnostic Tools, radio and climate controls. Turn the key towards the "On" position without beginning the car or truck.

2Connect the Tech 2 scan tool towards the Pc with a cable pass-through device. Start out the GM reprogramming software package on the Computer.

3Plug the Tech 2 scan tool to the diagnostic connector situated below the steering wheel. Turn the Tech 2 scan tool on and confirm the car identification number (VIN) situated in the bottom with the dash through the driver's side windshield.

4Enter all of the choices appropriate to your automobile and select "Normal Reprogramming." Highlight the tuning version preferred and start the transfer of data. The data transfer can take so long as 30 minutes along with the message "Programming Complete" seems on the screen when finished.

5Turn the ignition towards the "Off" position and disconnect the Tech 2 scan tool from the diagnostic connector.

Related articles:

• Obd2 scanner Positive
• Auto diagnostics if you know some basic automobile work theory you may be able to do that.
• Auto diagnostic tools as members of BIMRS.org