How to Clear Dodge Truck Codes Clearing Dodge Truck Codes1Locate the diagnostic scanner port. It'll be positioned inside the cab, underneath the dash on the driver's side from the vehicle.2Insert the diagnostic code scanner's cable into the diagnostic port in your car.3Insert the key in to the ignition and turn it for the run position.
Tend not to commence the engine.4Using the directions provided with the diagnostic code scanner, possess the scanner search the engine personal computer for trouble codes.5When the scanner is completed Auto diagnostic tools, Press the button on the scanner labeled "clear trouble codes".6Disconnect the diagnostic code scanner from the car. How to Clear Diagnostic Codes inside a CTS1Plug the scan tool in to the information link port Obd2 scanner, situated under the drivers side dash, just to the left in the steering wheel.2Turn the important towards the "On" position.
Press the "Read" button. Write down the codes and match them to the code sheet to discover their which means. Unplug the scan tool and turn the important off. Repair the issue as directed by the definition on the code on the code sheet.3Plug the scan tool into the data hyperlink port. Turn the key for the "On" position. Press the "Erase" button, along with the scanner will delete the codes.4Test drive the automobile. In the event the MIL light returns, repeat the procedure.
Related articles:
没有评论:
发表评论